Z Series E85 M roadst (S54) ROADST
65 77 016
Removing and installing/replacing airbag
control unit (build date from 01/2006)
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover.
•
Remove rear storage compartment.
Release screws (1) on both sides and remove bracket (2).
Release screws (1) and remove airbag control unit (2).
Tightening torque 65 77 1AZ
.
Installation:
Make sure ground cable (3) is correctly seated.
RA Removing and installing/replacing airbag control unit (build date from 01/2006)
BMW AG - TIS
07.02.2013 06:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -