Z Series E85 Z4 2.0i (N46) ROADST
Unlock and disconnect plug connection (1) on camshaft sensor in
direction of arrow.
Installation:
Lock on plug (1) must snap audibly into place.
Release screw plug (see arrow).
Installation:
Replace sealing ring.
Tightening torque 25 Nm.
Important!
Take care - screw can fall down very easily.
Remove lower screw of chain guide.
Remove upper screw of chain guide (1).
RA Removing and installing/sealing cylinder head (N42)
BMW AG - TIS
08.02.2013 05:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
