Z Series E85 Z4 2.0i (N46) ROADST
Fit special tool 11 9 291 on exhaust camshaft.
Turn back special tool 11 9 293 .
Hold inlet camshaft with special tool 11 9 291 so that it rests
without a gap on cylinder head.
Insert screws and tighten down special tool 11 9 291 on
cylinder head.
Tighten down special tool 11 9 293 by hand until it is supported
on special tool 11 9 292 .
Insert screw and tighten down special tool 11 9 292 on cylinder
head.
Remove chain tensioning piston.
RA Adjusting camshaft timing (N42 / N46)
BMW AG - TIS
08.02.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -