Z Series E85 Z4 2.0i (N46) ROADST
13 62 560
Removing and installing/replacing air-mass
flow sensor
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
Unlock plug (1) and remove.
Release clamp (2)
Loosen retainers.
Remove top section of intake filter housing (3).
Release clamps.
Detach air intake hose (1).
Unscrew nuts.
Remove air-mass flow sensor (1).
RA Removing and installing/replacing air-mass flow sensor
BMW AG - TIS
08.02.2013 06:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -