Z Series E85 Z4 2.0i (N46) ROADST
16 11 048
Removing and installing/replacing fuel filter
with pressure regulator
Special tools required:
•
16 1 020
Necessary preliminary tasks:
•
Draw off fuel from fuel tank.
•
Remove exhaust system.
•
Remove tunnel thermal insulation.
Disconnect feed line (1) and connector (2) from fuel filter.
Note:
To disconnect feed line, press ring (3) in direction of fuel filter and
pull out feed line (1).
Release screw cap with special tool 16 1 020 .
Installation:
Always replace rubber seal.
Tightening torque 16 14 2AZ.
RA Removing and installing/replacing fuel filter with pressure regulator
BMW AG - TIS
08.02.2013 07:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
