Z Series E85 Z4 2.0i (N46) ROADST
41 61 014
Adjusting engine bonnet/hood
Read contents of Body, General.
The gap dimensions serve as the basis for adjustment work.
Make unpainted surfaces visible by also moving the hinges. Touch
these up in the appropriate colour.
Remove trim grille.
Release screws (1) on lock (view from front through opening in
trim grille).
Release screws (1) on lock.
Lock be able to be move.
Check stop screw of hood lid hinge on left and right.
Plastic head of stop screw must not be damaged or missing,
replace hood lid hinge if necessary.
RA Adjusting engine bonnet/hood
BMW AG - TIS
08.02.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -