Z Series E85 Z4 2.0i (N46) ROADST
51 45 181
Removing and installing/replacing trim for
instrument panel, bottom right
Release screws (1).
Pull back bottom right instrument panel trim (2) in direction of
arrow.
Unlock associated plug connections and disconnect.
Remove bottom right instrument panel trim (2).
Replacement:
Remove footwell light.
Remove general module.
Installation:
Make sure guide (3) of bottom right instrument panel trim (2) is
correctly seated in associated mounting.
Make sure bottom right instrument panel trim (2) is correctly
seated on footwell vent above.
RA Removing and installing/replacing trim for instrument panel, bottom right
BMW AG - TIS
08.02.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -