Panel Installation for Luggage Compartment Partition - Z Series E85 Z4 20i (N46)
51 47 140
Removing and installing / replacing panel for
luggage compartment partition
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel
•
Remove centre mount for convertible top compartment floor
•
Remove trim behind rollover bar on left and right
M Roadster:
•
Remove battery
Release screw clips (1) on left and right.
Cut into partition (2) in area of emergency release (3) in such a
way that emergency release button (3) fits through.
Feed out emergency release button (3) through partition (2).
Note:
View from rear without convertible top.
Raise trim (1) for rear storage box slightly.
Release clips from deflector (2).
Lift deflector (2) out of tabs (3) of partition (4).
Feed out partition (4) inwards.
Installation:
Make sure deflector (2) is correctly seated in tabs (3).
RA Removing and installing / replacing panel for luggage compartment partition
BMW AG - TIS
08.02.2013 13:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
