Z Series E85 Z4 2.0i (N46) ROADST
Installation:
Guides (1) and catches (2) on switch combination (3) must not
be damaged.
Model with lumbar supports:
If necessary, feed out cable (1) and disconnect plug
connection (2).
Replacement only:
If necessary, unlock down catches (3) on left and right.
Remove switch (4) from cover.
Installation:
Following parts must not be damaged.
1.
Locators for switch combination
2.
Guide, front
3.
Lugs
If necessary, replace cover (4).
Replacement of switch combination only or in event of further work
on front seat:
Disconnect plug connection (1) and remove switch combination
(2).
RA Removing and installing/replacing outer cover on front left or right seat (norma
BMW AG - TIS
08.02.2013 13:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -