Z Series E85 Z4 2.5i (N52) ROADST
Pull hydraulic unit (1) up and out of rubber grommets (2).
Remove hydraulic unit (1) through wheel arch.
Note:
The holder must be modified if the hydraulic unit is replaced.
Replacement:
-
Carry out programming/coding
-
Adjustment of steering angle sensor
-
Mix-up check of brake lines
-
Function check, hydraulic unit
RA Removing and installing/replacing DSC hydraulic unit
BMW AG - TIS
12.02.2013 07:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -