Z Series E85 Z4 2.5i (N52) ROADST
41 61 014
Adjusting engine bonnet/hood
Read contents of Body, General.
The gap dimensions serve as the basis for adjustment work.
Make unpainted surfaces visible by also moving the hinges. Touch
these up in the appropriate colour.
Slacken screws (1) on locks.
Locks must be able to be moved.
Tightening torque 51 23 2AZ
.
Check stop screw of hood lid hinge on left and right.
Plastic head of stop screw must not be damaged or missing,
replace hood lid hinge if necessary.
Loosen screws (1) and (2) on left and right hinges.
Hood lid must be able to be moved.
Tightening torque 41 61 1AZ
.
Note:
If the adjustment range is not sufficient, release retaining
screws of engine hood hinge on body and move hinge.
Tightening torque 41 61 2AZ
.
RA Adjusting engine bonnet/hood
BMW AG - TIS
12.02.2013 09:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -