Z Series E85 Z4 2.5i (N52) ROADST
51 43 075
Removing and installing / replacing side trim
panel, footwell, on A-pillar, right
Necessary preliminary tasks:
•
Remove front entrance cover strip (inside)
•
Remove trim for instrument panel, bottom left
Detach mucket (1) in area of panel (3).
Release screw (2).
Unclip panel (3) in direction of arrow at retaining points (4) and
remove.
Installation:
If necessary, lever out clips (1) remaining in bores.
If necessary, replace faulty clips (1).
Make sure lugs (2) are correctly seated in associated mountings.
Position panel (3) preinstalled with clips (1) on associated bores
and clip into place.
RA Removing and installing / replacing side trim panel, footwell, on A-pillar, righ
BMW AG - TIS
12.02.2013 10:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -