Z Series E85 Z4 2.5i (N52) ROADST
Unclip bumper trim (1) in area (2) on left/right in direction of
arrow with special tool 00 9 317 .
Version with headlight washer system:
Have a rubber plug on hand.
Pull bumper trim (1) forwards slightly, disconnect right hose from
T-distributor and seal with rubber plug.
Installation:
If necessary, top up washer fluid.
Version with fog lamps:
Pull bumper trim (1) forwards slightly and disconnect plug
connections on fog lamp on left/right.
Remove bumper trim (1) straight forwards with a 2nd person
helping.
RA Removing and installing front bumper trim
BMW AG - TIS
12.02.2013 09:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
