Z Series E85 Z4 2.5i (N52) ROADST
Unlock and disconnect plug connection on airbag module and
switch for glovebox light.
Note:
Do not lose nuts (5) belonging to screws (2), detach if
necessary.
Installation:
Replace retainers (1).
Make sure clips (1) are correctly seated in associated mountings.
Replacement:
•
Remove airbag module for front passenger knee protection
•
Remove damper for glovebox
•
If necessary, remove switch for glovebox light
•
If necessary, press both bearing pins (3) in direction of arrow
out of right glovebox with housing (2).
RA Removing and installing right glovebox with housing (with active knee protection
BMW AG - TIS
12.02.2013 09:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -