Z Series E85 Z4 2.5i (N52) ROADST
51 41 019
Removing and installing/replacing door
handle on door trim panel, front left or right
Necessary preliminary tasks:
•
Remove cover on door handle
Release screws (1).
Tightening torque 51 41 2AZ
.
Release screws (1).
Tightening torque 51 41 8AZ
.
If necessary, lever out lock (2) and detach lamp (3).
Detach door handle (4) from door trim and if necessary feed out
cable.
Installation:
Following parts on door handle (4) must not be damaged or
missing:
1
Bores for screw connection
2
Bore for light
3
Sleeves
RA Removing and installing/replacing door handle on door trim panel, front left or
BMW AG - TIS
12.02.2013 10:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -