Z Series E85 Z4 2.5i (N52) ROADST
51 43 030
Removing and installing/replacing cover on
front left or right rollover protection bar
Necessary preliminary tasks:
•
Remove cover on rear rollover protection bar
Version with wind deflector:
Lever out plugs (1) with needle and release screws underneath.
Take off holder (2).
Installation:
Replace plugs (1).
Release catches (2) and remove cover (1) in direction of arrow.
Installation:
Fit cover (1) correctly in intermediate rings (3).
Installation:
Catches (1) on cover (2) must not be damaged.
RA Removing and installing/replacing cover on front left or right rollover protecti
BMW AG - TIS
12.02.2013 10:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
