Z Series E85 Z4 2.5i (N52) ROADST
54 31 180
Removing and installing/replacing a mounting
for convertible top compartment floor
Necessary preliminary tasks:
•
Open rear lid.
•
Remove convertible top compartment base
Release screws (1 and 2) and remove expansion rivet (3).
Feed out mounting towards rear top over spring strut cap.
Installation:
Feed in mounting under funnel.
RA Removing and installing/replacing a mounting for convertible top compartment flo
BMW AG - TIS
12.02.2013 11:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -