Z Series E85 Z4 2.5i (N52) ROADST
61 12 200
Replacing wiring harness in left or right front
door
Necessary preliminary tasks:
•
Close front side window completely
•
Disconnect battery negative lead
•
Remove front door trim panel
•
Remove airbag module in front door
•
Remove sound insulation in front door
Disconnect plug connection (1).
Disconnect plug connections (2).
Disconnect plug connection (3).
Release door wiring harness at points (4).
Installation:
Make sure door wiring harness is correctly laid.
Note:
Front side panel shown removed for purposes of clarity.
Release screw (1), fold door wiring harness plug on A-pillar (2)
downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) in direction of arrow out of front
door (4).
Feed out door wiring harness towards front to A-pillar and remove.
RA Replacing wiring harness in left or right front door
BMW AG - TIS
12.02.2013 12:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
