Z Series E85 Z4 2.5i (N52) ROADST
65 77 610
Replacing sensor mat for passenger seat
occupancy detector
Warning!
US/CND front passenger seat (with OC3 mat) only:
Seat cover must not be separated from padding.
All parts must be replaced completely and released with the
diagnosis system in event of defective fan, seat cover, seat
heating, OC3 mat or padding.
Necessary preliminary tasks:
•
Remove seat cover for passenger seat
Remove sensor mat (1) from passenger seat padding.
Important!
To avoid malfunctions, make sure sensor mat (1) is cleanly
laid:
•
Lay plug-in connection in designated recess.
•
Lay sensor mat (1) straight and without kinks (large bending
radii).
•
If necessary, secure sensor mat (1) with adhesive tape
provided.
RA Replacing sensor mat for passenger seat occupancy detector
BMW AG - TIS
12.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
