Z Series E85 Z4 2.5i (N52) ROADST
86 10 ...
Disassembly of left and right lamp housings
Cut through sealing compound (1) and remove.
Drill out rivet connections (2).
Installation:
Use Sikaflex 221 as sealing compound.
Drill out rivet connections (1).
Raise side sections (2, 3).
Pull out lamp housing (4) towards inside in direction of platform.
RA Disassembly of left and right lamp housings
BMW AG - TIS
12.02.2013 15:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -