Z Series E85 Z4 2.5Si (N52) ROADST
Release screws in area (1).
Installation:
Replace aluminium screws.
Tightening torque 11 12 4AZ
Release screws (2).
Tightening torque 11 12 4AZ
Installation:
Replace aluminium screws.
Replace seal (1).
Replace seal (2).
Installation:
Clean all sealing surfaces.
Do not clean sealing faces (1 and 2) with a metal-cutting tool.
Assemble engine.
RA Removing and installing/sealing cylinder head cover (N52)
BMW AG - TIS
13.02.2013 08:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -