Z Series E85 Z4 2.5Si (N52) ROADST
Support exhaust system with jack and special tool 31 2 220 and
secure against falling out.
Unscrew nuts (1).
Tightening torque 18 20 1AZ
.
Remove retaining plate (2).
Unscrew nut (3).
Tightening torque 18 20 1AZ
.
Installation:
Replace both seals (1).
Replace self-locking nuts.
Coat threads with copper paste, refer to BMW Parts Service.
Release nuts on rubber mount of rear muffler.
Release nuts on rubber mount of rear muffler.
Lower exhaust system with jack and remove.
RA Removing and installing complete exhaust system (N52)
BMW AG - TIS
13.02.2013 10:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -