Z Series E85 Z4 2.5Si (N52) ROADST
21 52 500
Removing and installing/replacing clutch
master cylinder
Necessary preliminary tasks:
•
Remove trim for instrument panel at bottom left
Note:
After completing work, bleed clutch hydraulic system.
Draw off brake fluid up to supply hose of clutch hydraulic
system (1). For this purpose, use only a vacuum pipe that is
exclusively used for removing brake fluid.
Detach supply hose (1) from expansion tank.
Press pin (1) out of clutch pedal with a short, thin screwdriver.
RA Removing and installing/replacing clutch master cylinder
BMW AG - TIS
13.02.2013 10:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -