Z Series E85 Z4 2.5Si (N52) ROADST
26 11 020
Replacing centre mount gaiter
Necessary preliminary tasks:
•
Remove propeller shaft.
Note:
The propeller shaft is balanced. The front and rear propeller
shafts must be reassembled in the same position.
Detach gaiter (1) from groove (2).
Mark front propeller shaft (3) and rear propeller shaft (4) in one
plane.
Pull propeller shaft apart.
Installation:
If necessary, insert new clamping ring (1) into front propeller
shaft (2).
RA Replacing centre mount gaiter
BMW AG - TIS
13.02.2013 11:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -