Z Series E85 Z4 2.5Si (N52) ROADST
31 11 506
Lowering/raising front axle carrier
Warning!
Danger to life!
Secure engine in installation position to prevent it from falling
down.
Necessary preliminary tasks:
•
Secure engine in installation position
•
Remove front assembly underside protection
•
Remove reinforcement plate
•
Remove lower section of steering spindle from steering gear
Support front axle carrier in area (A) with workshop jack.
Release screws (1, 2).
Lower front axle carrier.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tighten down first screws (1) and then screws (2).
Tightening torque 31 10 1AZ
.
After installation:
•
Carry out steering angle sensor adjustment
RA Lowering/raising front axle carrier
BMW AG - TIS
13.02.2013 11:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -