Z Series E85 Z4 2.5Si (N52) ROADST
31 35 000
Removing and installing/replacing front
stabilizer
Necessary preliminary tasks:
•
Remove front assembly underside protection
•
Remove both stabilizer links from stabilizer
Unscrew nuts.
Remove stabilizer; if necessary, press off from engine carrier with
a suitable tool.
Installation:
Check rubber mount on both sides for damage, replace if
necessary.
Replace self-locking nuts.
Tightening torque 31 35 1AZ
.
Replacement:
Remove rubber mount on both sides from stabilizer.
RA Removing and installing/replacing front stabilizer
BMW AG - TIS
13.02.2013 11:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
