Z Series E85 Z4 2.5Si (N52) ROADST
34 32 951
Replacing rear left or right brake hose
Note:
Read and comply with General Information.
After completing work: Bleed braking system
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are
reconnected.
This prevents brake fluid from emerging from the expansion tank
and air from entering the system when the brake lines are opened.
Release union nut (1); to do so, grip brake hose at square (2).
Installation:
Tightening torque 34 32 1AZ
.
Disconnect brake hose from brake caliper (3).
Installation:
Tightening torque 34 32 2AZ
.
Important!
Mount and tighten brake hose on brake caliper first, then on
brake line/brake hose point of connection.
Never twist brake hose when installing it and avoid all contact
with parts attached rigidly to the body.
RA Replacing rear left or right brake hose
BMW AG - TIS
13.02.2013 13:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -