Z Series E85 Z4 2.5Si (N52) ROADST
Press retaining lug (1) downwards and pull out cable (2).
Feed out mounting pan towards bottom.
Pull handbrake Bowden cables out of rear axle guide.
Installation:
Replace gasket (3).
Unclip mounting clip (1) upwards out of balance arm (2).
Feed handbrake Bowden cables (1) inwards with a screwdriver
and pull out of balance arm (2).
RA Removing and installing/replacing handbrake lever with mounting pan
BMW AG - TIS
13.02.2013 13:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -