Z Series E85 Z4 2.5Si (N52) ROADST
41 62 519
Removing and installing/replacing left or right
hinge for rear lid
Read contents of Body, General.
Remove gas spring strut (1).
Open screw connections (2) on rear lid.
Important!
Secure rear lid against falling down, remove if necessary.
Open screw connections (3) on car.
Remove hinge.
Installation:
E85 body gap dimensions are the basis for rear lid adjustment.
RA Removing and installing/replacing left or right hinge for rear lid
BMW AG - TIS
13.02.2013 14:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -