Z Series E85 Z4 2.5Si (N52) ROADST
Press special tool 51 3 252 at front against stop (2).
Guides (3) on outside door handle (4) are free.
Remove both special tools.
Lift out lower edge of outside handle and feed out obliquely
downwards.
Installation:
Following parts on outside handle (5) must not be damaged or
missing:
1
Seal
2
Guide
3
Rubber mount
4
Rubber mount
Installation:
-
Install outside door handle (3)
-
Insert special tool 51 3 252 into bore of locking plate (1)
and press plate towards rear
-
Guides (2) on outside door handle (3) are locked
-
Carry out operational check
RA Removing and installing or replacing outside handle from left or right front doo
BMW AG - TIS
13.02.2013 15:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -