Z Series E85 Z4 2.5Si (N52) ROADST
51 71 371
Removing and installing/replacing tension
strut on left or right spring strut dome
Special tools required:
•
00 9 120
Important!
Vehicles must not be driven without tension struts.
Driving without tension struts may damage the vehicle body.
Tension struts can be secured with screws or nuts.
Screws must be tightened to specified torque and then
tightened down with special tool 00 9 120 .
Release nuts/screws (2) and remove tension strut (1).
Installation:
Tighten down nuts (2) to specified torque.
Replace screws (2), tighten to specified torque and then to angle
of rotation.
Tightening torque 51 71 4AZ
.
RA Removing and installing/replacing tension strut on left or right spring strut do
BMW AG - TIS
13.02.2013 19:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -