Z Series E85 Z4 2.5Si (N52) ROADST
54 34 159
Removing and installing/replacing left
convertible top catch (automatic)
Necessary preliminary tasks:
•
Remove front convertible top fabric
Remove cover (1).
2 = Right cover
Release screws (1) and remove Hall sensor.
Loosen screws (2).
Feed out catch (3) towards rear top, detach flexible shaft (4)
from catch in so doing.
Installation:
-
Catch must be set to "open" before flexible shaft is pushed
on. If necessary, turn accordingly by means of drive pinion.
-
Replace screws (2).
RA Removing and installing/replacing left convertible top catch (automatic)
BMW AG - TIS
13.02.2013 20:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -