Z Series E85 Z4 2.5Si (N52) ROADST
54 31 024
Removing and installing or replacing handle
for convertible top cover lock
Removing handle:
•
Open door windows slightly.
•
Unlock convertible top and raise slightly (if necessary over
dead center).
•
Release screw (1).
•
Remove handle.
•
Detach or unclip rosette (2).
Installation:
Make sure handle is in correct folding position (towards rear).
To feed in screw, forcefully press handle upwards.
RA Removing and installing or replacing handle for convertible top cover lock
BMW AG - TIS
13.02.2013 20:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
