Z Series E85 Z4 2.5Si (N52) ROADST
61 31 220
Removing and installing/replacing
multifunction steering wheel switch
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove airbag unit
Note:
Illustrations show multifunction steering wheel (3) removed.
The two multifunction steering wheel switches (2) can be
removed independently of each other.
Release associated screw (1).
Unclip corresponding multifunction steering wheel switch (2) in
direction of arrow from multifunction steering wheel (3).
Disconnect associated plug connections and remove multifunction
steering wheel switch (2).
Installation:
Make sure electrical leads are correctly routed.
RA Removing and installing/replacing multifunction steering wheel switch
BMW AG - TIS
13.02.2013 22:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -