Z Series E85 Z4 2.5Si (N52) ROADST
61 61 270
Removing and installing/replacing bracket for
windscreen wiper system complete with
motor
Necessary preliminary tasks:
•
Remove cowl panel cover
Unfasten plug connection (1) and disconnect.
Unclip and remove clamping lever (2).
Installation:
If necessary, replace clamping lever (2).
Release screws (3).
Installation:
Tightening torque, 61 61 6AZ
.
Remove wiper bracket (4) upwards.
Installation:
Before fitting the wiper arms, allow the windscreen wiper motor to
run into the rest position.
To ensure that the windshield wiper system functions properly,
check/adjust the contact angle of the wiper arms to the windshield.
RA Removing and installing/replacing bracket for windscreen wiper system complete w
BMW AG - TIS
13.02.2013 22:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -