Z Series E85 Z4 2.5Si (N52) ROADST
64 11 872
Removing and installing/replacing servodrive
for blending flap
Necessary preliminary tasks:
•
Remove controller for heater - A/C fan.
Unlock plug connection (1) and disconnect.
Press lock (2) and pull out servodrive for blending flap (3) in
direction of arrow.
Installation:
Follow repair instruction "Installing servodrive".
RA Removing and installing/replacing servodrive for blending flap
BMW AG - TIS
13.02.2013 23:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -