Z Series E85 Z4 2.5Si (N52) ROADST
65 20 055
Removing and installing/replacing antenna
base
E86 only:
Necessary preliminary tasks:
•
Remove wheel arch cover at rear top
Release antenna rod (1) in direction of arrow and remove from
antenna base (2).
Unlock plug connections (1) and disconnect.
Release screw (2) and remove antenna amplifier (3)
downwards.
Installation:
Tightening torque 65 20 1AZ
.
Remove antenna base (1) towards top.
RA Removing and installing/replacing antenna base
BMW AG - TIS
13.02.2013 23:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
