Z Series E85 Z4 2.5Si (N52) ROADST
65 20 300
Removing and installing/replacing bumper
antenna
Necessary preliminary tasks:
•
Remove rear bumper trim
•
Partially remove luggage compartment wheel arch trim on left
Unlock plug connection (1) on antenna amplifier (2) and
disconnect.
Pull out rubber plug (1) with antenna lead in direction of arrow.
Unclip bumper antenna (2) at points (3) and remove.
RA Removing and installing/replacing bumper antenna
BMW AG - TIS
13.02.2013 23:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -