Z Series E85 Z4 2.5Si (N52) ROADST
65 77 740
Removing and installing (replacing) left front
door sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover
•
Remove front left door trim panel
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove front door sensor (3).
Installation:
Tightening torque 65 77 7AZ
.
Installation:
Make sure front door sensor seal (1) is correctly seated. Pins (2)
must be exactly seated in mountings (3).
If necessary, replace front door sensor seal (1).
RA Removing and installing (replacing) left front door sensor
BMW AG - TIS
14.02.2013 00:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -