Z Series E85 Z4 3.0i (M54) ROADST
00 00 250
BMW engine oil service incl. supplementary
service (M54 / M56)
Note:
Work step 00 00 250 comprises the engine oil and
supplementary services.
Only the engine oil service will be described in these repair
instructions.
For the supplementary service work steps, refer to the
vehicle-specific inspection sheet.
Engine oil service:
Release and tighten down main flow oil filter cap with a socket
only.
When the main flow oil filter cap is opened, engine oil flows from
the oil filter housing back into the oil sump.
Release main flow oil filter cap and remove towards top.
Installation:
Tightening torque 11 42 2AZ.
Installation:
Replace and oil O-ring.
Drain or draw off engine oil.
When engine oil is drained, open cap in engine underguard.
Open oil drain plug and drain off engine oil.
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ
.
RA BMW engine oil service incl. supplementary service (M54 / M56)
BMW AG - TIS
15.02.2013 09:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
