Z Series E85 Z4 3.0i (M54) ROADST
-
special tool 11 1 045
-
special tool 11 0 342
-
special tool 11 0 343
-
special tool 11 0 345
-
special tool 11 1 441
Assemble special tools.
Note:
Do not install special tool 11 1 441 (locating board) in
special tool 11 1 065 at this stage.
Place cylinder head on special tool 11 1 065 and screw on with
two screws.
Remove all valve springs.
Remove all valve stem seals.
Remove all valves.
RA Disassembling and assembling cylinder head (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 10:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -