Z Series E85 Z4 3.0i (M54) ROADST
11 12 719
Resurfacing cylinder head sealing surface
(M52 / M52TU / M54 / M56)
(cylinder head dismantled)
Check flatness of cylinder head sealing surface with a
commercially available straightedge.
Deviation from flatness max. 0.05 mm.
Note:
Machining limit.
Note:
For compression comparison check, a repair cylinder head
seal is provided.
RA Resurfacing cylinder head sealing surface (M52 / M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 10:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
