bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52TU _ M54 _ M56)|Page 327 > < 1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52TU _ M54 _ M56)

Z Series E85 Z4 3.0i (M54) ROADST

Page 2
background image

Raise engine with special tool 00 0 200  approx. 5 mm.

Remove suction filter housing.

Remove engine splash guard.

Drain engine oil.

On vehicles with automatic transmission:

Disconnect oil lines from automatic transmission and from oil pan.

Release guide tube for dipstick.

Note:

M52 TU and M54 only.

Detach return hose from cyclone oil separator on oil dipstick guide
tube.

Remove oil dipstick guide tube upwards.

Installation:

Replace O-ring.

RA  Removing and installing, sealing or replacing oil sump (M52TU / M54 / M56)

BMW AG - TIS

15.02.2013  10:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52TU _ M54 _ M56)|Page 327 > < 1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52TU _ M54 _ M56)