Z Series E85 Z4 3.0i (M54) ROADST
11 23 010
Removing and installing or replacing
vibration damper (M52TU / M54 / M56)
Special tools required:
•
11 8 190
•
11 8 200
•
11 8 210
Necessary preliminary tasks:
•
Unscrew and remove splash guard.
•
Remove fan impeller with fan clutch and fan cowl
•
E83/E85/E60: Remove fan cowl with electric fan
•
Remove A/C compressor drive belt
•
Remove alternator drive belt
Important!
Risk of damage.
Protect cooler against damage.
Version 1
Vibration damper and hub for vibration damper are two parts:
Unscrew vibration damper bolts and take off vibration damper.
RA Removing and installing or replacing vibration damper (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 11:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
