Z Series E85 Z4 3.0i (M54) ROADST
11 31 001
Replacing camshaft (M52TU / M54 / M56)
Special tools required:
•
00 9 250
•
11 2 300
•
11 3 240
•
11 3 244
•
11 3 250
•
11 3 260
•
11 3 292
•
11 4 220
•
11 6 150
•
11 6 180
(if necessary inlet or exhaust side)
The inlet or exhaust camshaft can be replaced in the vehicle.
Important!
Incorrect assembly/removal without special tools exposes the
camshaft to the risk of preliminary damage or breakage. The
valves may also be bent by contact with the piston crown.
Comply without fail with the job instructions, recommended
special tools and work sequence.
Removal
Removal of camshafts is described separately from installation.
The assembly sequence for removal and installation is different.
Remove VANOS adjustment unit.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
