Z Series E85 Z4 3.0i (M54) ROADST
Release nuts on inlet side and remove corrugated washer (7).
Unfasten screws.
Lift off exhaust and inlet chain wheels together with chain, friction
washer (3) and toothed shaft (4).
Note:
Toothed shaft (4) is and identical part for exhaust and inlet sides.
Store used toothed shafts in order and reinstall on the same side
only.
Remove toothed shaft (5) with toothed sleeve (6).
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
