Z Series E85 Z4 3.0i (M54) ROADST
Comply with following waiting periods after installing camshaft and
before cranking engine back to TDC position.
-
Room temperature (20
°
C) 4 mins
-
10
°
C ... 20
°
C 11 mins
-
0
°
C ... 10
°
C 30 min
Pull up timing chain and feed in exhaust camshaft.
Position timing chain on exhaust camshaft.
Install camshafts so that cam tips on inlet and exhaust valves on
1st cylinder face one another.
Fit bearing cover.
Note:
Bearing caps are marked from exhaust side:
A1 ... A7 for exhaust side
E1 ... E7 for inlet side
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
15.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
