Z Series E85 Z4 3.0i (M54) ROADST
Replace sealing caps and install with special tool 11 6 170 or
with commercially available short flat nose pliers.
E85:
Use commercially available offset flat nose pliers.
Insert screw plugs with new sealing rings and tighten down.
Tightening torque 11 36 3AZ
.
Fit suspension lug.
Note:
If the double VANOS adjustment unit has been replaced, you
must check and, if necessary, adjust the camshaft timing.
If work has been carried out which has "no" effect on the timing
and it is assured that the timing adjustment is correct, the timing
check described in the following does not"" have to be conducted.
RA Removing and installing or replacing double VANOS adjustment unit (M52TU / M54 /
BMW AG - TIS
15.02.2013 11:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
