Z Series E85 Z4 3.0i (M54) ROADST
11 51 000
Removing and installing/replacing water
pump (M54)
Necessary preliminary tasks:
•
Remove suction filter housing.
•
Remove alternator drive belt.
•
Secure engine in installation position with special tool.
Drain and dispose of coolant.
Installation:
Replace seal.
Tightening torque 11 11 5AZ
.
Vent cooling system and check for leaks.
Release engine mount at top left.
Installation:
Tightening torque, 22 11 1AZ
.
Raise engine with special tool approx. 3 cm to ensure removal
of water pump.
Measurement A = 3 cm
Release nuts and remove belt pulley.
RA Removing and installing/replacing water pump (M54)
BMW AG - TIS
15.02.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
