Z Series E85 Z4 3.0i (M54) ROADST
11 61 050
Removing and installing intake air manifold
(M54)
Necessary preliminary tasks:
•
Instructions for disconnecting and connecting battery.
•
Disconnect negative battery lead.
•
Remove engine cover.
•
Remove bulkhead E46 / E53.
•
Remove microfilter housing E60.
Important!
Do not mix up oxygen monitor sensors for cylinders 1 to 3
and 4 to 6 at plug connection to wiring harness. Mark plug
connections.
Unclip plug connections (1) from holders.
Detach battery positive lead from intake air manifold.
Detach retainer (2) from battery positive lead.
E46 only
Pull off complete rubber strip (1).
Disconnect plug connection (2) on solenoid valve.
E46 only
Unclip cable penetrations from side trim panel.
Release locks (1) on side trim panel.
Pull out side trim panel towards top.
RA Removing and installing intake air manifold (M54)
BMW AG - TIS
15.02.2013 11:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
